Cleanroom Wall Panel
A flush, dry-fixed wall system for GMP and ISO-classified rooms, with the services cavity behind the panel.
- Samples available before approval — freight at buyer's account.
- Test reports and technical documentation released per product.
- FOB Qingdao or CIF to your destination port.
- Fire classification
- A · A1 (rock wool / magnesium) · A2 (silica)
- Coatings
- PE · PVDF · HDP · anti-static · antibacterial · anti-glare
- Surfaces
- stainless steel · galvanised · aluminium
- Cores
- rock wool · magnesium wool · magnesium oxide-sulphate · silica
- Magnesium density
- 950 kg/m³
Overview
Cleanroom walls fail at the joints. This system is detailed as a sealed, flush plane: panels are fixed dry to a rail or substrate, joints are closed with a compatible sealant or trim, and the cavity behind takes cable, conduit and small ductwork — so a service change means removing a panel, not opening the finish.
The surface is low-gloss and non-shedding, which is what the cleaning protocol actually requires: it withstands repeated disinfectant contact and does not generate particles at the joints.
Wall panels are supplied with the fixing system, corner and skirting details, and a method statement.
Key properties
- Class A fire performance (report on request)
- Sealed flush joints, wipe-down surface
- Services concealed in the panel cavity
- Dry installation — no wet trades, no curing time
- Compatible with coved skirting and cleanroom detailing
Full specification
| Fire classification | A · A1 (rock wool / magnesium) · A2 (silica) |
|---|---|
| Coatings | PE · PVDF · HDP · anti-static · antibacterial · anti-glare |
| Surfaces | stainless steel · galvanised · aluminium |
| Cores | rock wool · magnesium wool · magnesium oxide-sulphate · silica |
| Magnesium density | 950 kg/m³ |
Values are the manufacturer's tested figures. Where a figure is marked "report on request", the test report is released against a project reference.
Where it is specified
- Pharmaceutical manufacturing
- Hospital operating suites
- IVF and BSL laboratories
- Food production
- Electronics assembly
- Compounding pharmacies
FAQ
Can I get samples before specifying?
Yes — tell us finish and thickness and we send panels including cut sections, so your team sees the build-up rather than only the face.
Which documents come with the panel?
Fire, acoustic, antibacterial or hazardous-substance reports as applicable, plus the installation method statement. CE marking applies to our glass-fibre acoustic ceiling range only.
What is the minimum order and lead time?
Quoted per project, since both depend on panel types and mix. Send the area and the specification and we confirm in writing with the quotation.
Send the project and we will answer line by line
Including the lines we cannot meet — that is faster than finding out after the order.